A legislator decides to sponsor a bill,
sometimes at the suggestion of a constituent, interest group, public official or the Governor.
The legislator may ask other legislators in either chamber to join as cosponsors.
While a legislator performs a number of different tasks, the legislative function is essentially that of proposing, considering and enacting laws. Each year, Maine legislators consider thousands of ideas for state laws.
The process by which an idea becomes a law is complicated, involving many steps. It is designed to prevent hasty or uninformed decisions on matters that can affect the lives of every Maine citizen. Although that process may seem confusing at first, rules and procedures clearly define the steps that apply to every bill.
At the legislator's direction, the Revisor's Office, Office of Policy and Legal Analysis, and
Office of Fiscal and Program Review staff provides research and drafting assistance
and prepares the bill in proper technical form.
Ideas for bills come from many different sources: legislators, legislative committees, study groups, lobbyists, public interest groups, municipal officials, the Governor, state agencies and individual citizens. In some cases, the person or group requesting the legislation may have already drafted the bill. In most cases, however, the legislator turns to a legislative staff office for bill drafting assistance. All legislation, regardless of where initially drafted, is processed and prepared for introduction by legislative staff in accordance with standards established by the Revisor of Statutes.
During the First Regular Session of the Legislature, there are no formal limitations on the type or number of bills that may be submitted prior to cloture. The Second Regular Session of the Legislature is limited by the Constitution of Maine to budgetary matters, the Governor's legislation, legislation of an emergency nature approved by the Legislative Council, legislation submitted pursuant to authorized studies and legislation submitted by direct initiative petition of the electors.
The Joint Rules establish cloture deadlines for the submission of bills by state agencies and legislators during the First Regular Session. The Joint Rules also authorize the Legislative Council to establish deadlines and procedures for introduction of bills in the Second Regular Session.
Bill Sponsors: A bill may be introduced pursuant to authorizing law or resolve; in all other cases, a bill must have a legislative sponsor. A bill may have up to ten sponsors: one primary sponsor, one lead cosponsor from the other chamber and eight cosponsors from either chamber. The cosponsor of a duplicate or closely related bill may also be added as a cosponsor if he or she agrees to withdraw the duplicate bill, even if this makes the total number of sponsors more than ten.
In addition to introducing their own legislation, legislators also may act as sponsors for bills proposed by other people or groups. Usually, legislators support bills they sponsor. They may, however, introduce a bill "by request" as a service to their constituents when they do not fully support the purpose of the measure. A legislator who wishes a bill to be identified as "by request" should clearly so indicate when filing a bill drafting request.
Bill Drafting and Signing: Before formal introduction, the Revisor of Statutes reviews all proposed bills and either drafts them or edits any initial drafts to make them conform to proper form, style and usage. When a request for a bill is filed, it is assigned a Legislative Request (L.R.) number that is used to track the request until it is printed as a Legislative Document (L.D.).
The Revisor's Office serves as the central registry for all bill requests and administers the cloture deadlines established by the Joint Rules. The Joint Rules provide that bill requests that do not contain enough information or direction to draft a bill are not considered complete and may therefore be voided.
The Revisor's Office gives the bill to the Clerk of the House or Secretary of the Senate.
The bill is numbered, a suggested committee recommendation is made and the bill is printed.
The bill is placed on the respective body's calendar.
After processing by the Revisor's Office, a bill must be signed by the sponsor and any cosponsors. The Joint Rules require the sponsor and cosponsors to sign the bill or provide changes within deadlines established by the presiding officers. The signed bill is then sent up for printing to the Secretary of the Senate or the Clerk of the House, depending on whether the sponsor is a senator or a representative.
Reference to Committee: The Secretary and the Clerk suggest the committee of reference, assign the bill a Senate Paper (S.P.) or House Paper (H.P.) number and Legislative Document (L.D.) number and place it on the next Calendar for consideration in that legislative body. Bills are usually identified and referred to throughout the rest of the session by their L.D. numbers.
When the Secretary and the Clerk disagree on the suggested committee of reference, they refer the matter to the President and the Speaker; if the latter disagree, the Legislative Council resolves the question. When the Legislature is in recess, the Secretary and the Clerk, pursuant to the Joint Rules, refer bills and order them printed. Floor action is not required. A notice of the action appears in the House and Senate Calendars.
The suggested reference is made to the committee that seems most appropriate based on the bill's subject matter. For example, most bills that deal with utilities are reviewed by the Committee on Utilities and Energy. However, a bill making tax changes for utilities could be referred to either the Committee on Utilities and Energy or the Committee on Taxation. When a bill has a subject matter that falls within the jurisdiction of more than one committee, suggested references may be made and the Legislature may vote to refer the bill to more than one committee.
The bill is referred to one of the Joint Standing or Joint Select committees in the originating branch
and then sent to the other body for concurrence.
The vote on reference is the first floor action taken on a bill. In most cases, approval of the suggested committee reference is a matter of form. Occasionally, the reference is debated and the House and the Senate may refer the bill to a different committee. If the House and the Senate cannot agree on which committee will hear the bill, it can go no further in the process.
In a few unusual circumstances, a bill may be engrossed without reference to a committee under suspension of the Joint Rules. That means that the bill goes directly to the floor of the appropriate body for discussion and action. Engrossing without reference usually occurs when the bill is of an emergency nature and the time to go through the public hearing process is not available.
Form of a Bill: There are different types of House Papers and Senate Papers designed for different purposes. Among these are bills, expressions of legislative sentiment, memorials, orders, resolutions, resolves and constitutional resolutions. The discussion here focuses primarily on the particular form of paper called a bill. Unlike other papers, a bill, if enacted, becomes a state law. The legislative process is primarily concerned with the drafting, consideration and enactment of bills.
Every bill has certain basic components in addition to the assigned House Paper or Senate Paper number and L.D. number. These components include the number of the legislative session, the date of introduction, the name of the committee suggested for reference, the sponsor and any cosponsors, the title, the text of the bill and the summary.
In the text, any existing statutory language proposed to be repealed is crossed out and all new statutory language is underlined. When a bill repeals and replaces an existing statute or creates an entirely new statute, all of the text is underlined.
Following the text of the bill is the summary, a plain-English explanation of the content and intent of the bill, which is prepared by the Revisor's Office.
When scheduled by the chairs, the committee conducts a public hearing
where it accepts testimony supporting and opposing the proposed legislation from any interested party.
Notices of public hearings are printed in newspapers with statewide distribution, and
posted on the Legislature's web site (See the Committee Hearings and Work Sessions link on the Legislative Activities Page).
Virtually all bills are reviewed, analyzed and discussed by one or more legislative committees before they are considered on their merits by the full Legislature. Bills are referred to committees by both chambers, receive a public hearing, are worked on in committee work sessions and are given a recommendation, or "report," by the committee to the whole Legislature.
The Joint Rules authorize 17 joint standing committees, each consisting of three members of the Senate and ten House members. The President of the Senate and the Speaker of the House appoint all committee members and committee chairs. Each committee has a Senate Chair and a House Chair.
Each committee is assigned one or more legislative analysts from the Office of Policy and Legal Analysis (OPLA) or the Office of Fiscal and Program Review (OFPR) by the respective office directors. The analyst provides nonpartisan staff services to all committee members. Each committee also has a committee clerk who is responsible for maintaining official records of the committee and for providing general clerical and administrative support.
Bill Distribution: Once the committee of reference has been established and the bill has been printed, it is distributed to members of the Legislature and to all town and city clerks who request copies. Bills are available to the public through the Legislative Document Room at the State House. The Clerk of the House provides copies of all bills through a subscription service for which a fee is charged. The Legislature provides access to bills on the Internet at http://legislature.maine.gov/.
Public Hearing: The next step is a public hearing, usually held within the State House or the Cross State Office Building. After the committee chairs set the date and place for public hearings, notices are placed in advance in the weekend editions of Maine's major newspapers, typically two weekends in advance of the hearing. Information about public hearings and work sessions sorted by committee or by sponsor is also available on the Legislature's web site by clicking the "Committee Hearings and Work Sessions" link at the top of the Legislative Activities Calendar page (http://www.mainelegislature.org/legis/calendar/).
The public hearing, presided over by a committee chair, allows legislative sponsors to explain the purpose of the bill, and citizens, state officials and lobbyists to express their views on the bill.
Customarily, the bill's sponsor testifies first, followed by any cosponsors and other proponents. In general, opponents testify next and, finally, those persons who are neither opponents nor proponents comment on the bill. At the conclusion of a person's testimony, committee members may ask questions. The committee's formal action on a bill comes later at what is called a work session.
Work Session: The purpose of work sessions is to allow committee members to discuss bills thoroughly and to vote on the committee's recommendation, or report, to the Legislature. The committee works with its legislative analyst to draft amendments or review amendments proposed by others. Some bills require several work sessions.
Work sessions are open to the public and, at the invitation of the committee, department representatives, lobbyists and others may address the committee about bills being considered, suggest compromises or amendments and answer questions. The committee may also ask its legislative analyst to research and explain certain details of the bill.
Amendments are suggested changes to the bill, which may clarify, restrict, expand or correct it. At times, revisions are so extensive that the entire substance of the bill is changed by the amendment. On rare occasions, extensive revision of the bill may take the form of a new draft rather than that of an amendment. A new draft is then printed as an L.D. with a new number. Authorization of the President of the Senate and the Speaker of the House is required to prepare a new draft.
Committee Report: The committee's decisions on bills and amendments are expressed by votes on motions made during a work session; the final action is called a "committee report." The report a bill receives is often the most important influence on its passage or defeat. Several types of unanimous and divided reports on a bill are possible.
A unanimous report means all committee members agree. Possible unanimous committee reports are: "ought to pass," "ought to pass as amended," "ought to pass in new draft," "ought not to pass" and "referral to another committee."
If committee members disagree about a bill, they may issue a divided report, which usually includes a "majority" and "minority" report on the bill, e.g., a majority "ought not to pass" report and a minority report of "ought to pass as amended." Less frequently, there are more than two reports, e.g., six members vote for Report A, "ought to pass," five members vote for Report B, "ought not to pass," and two members vote for Report C, "ought to pass as amended."
If an "ought not to pass" report is unanimous, the bill is placed in the legislative file, and a letter from the committee chairs conveying this report appears on the Senate and House Calendars. When that occurs, no further action may be taken by the Legislature unless a Joint Order recalling the bill from the file is approved by two-thirds of the members voting in both chambers. If it is recalled, the bill is reconsidered.
Unless the committee report is a unanimous "ought not to pass," a legislator may move, at the appropriate time during floor debate, to substitute the bill for the report. A majority vote is required for the motion to succeed. Such a motion is usually made only when neither report of a divided report has been accepted.
Prior to reporting out a bill, the committee must determine whether the bill will increase or decrease state revenues or expenditures as well as whether the bill constitutes a State Mandate under the Constitution of Maine. The Office of Fiscal and Program Review makes the determination of whether the bill will have a fiscal impact. If it does, that office has the responsibility for producing a fiscal note, which describes the fiscal impact. If the bill constitutes a State Mandate, this fact is also noted in the fiscal note. If the bill does have a fiscal impact, the committee must amend the bill to add the fiscal note. Any necessary appropriation or allocation is also added by committee amendment.
When the bill is reported to the floor it receives its
first reading and any committee amendments are adopted at this
The committee reports the bill to the originating body as is, with amendment,
with a divided report or with a unanimous recommendation of Ought Not to Pass.
To be enacted, bills must pass through at least four steps on the floor of both the Senate and the House: first reading, second reading, engrossment and enactment. An understanding of the Senate, House and Joint Rules is essential to follow and influence a bill's progress on the floors.
First and second readings: Once a bill is reported out by a committee, it is returned to the chamber in which it originated. If there is a new draft or committee amendment reported by the committee, it is drafted by the committee's legislative analyst, prepared by the Revisor's Office and submitted to the Secretary of the Senate or the Clerk of the House for printing and distribution. If a fiscal note is required it will be prepared by the Office of Fiscal and Program Review and included in the committee amendment. The Secretary or the Clerk places the title of the bill and the committee report on the printed Calendar. The first time the bill, as reported by the committee, is placed on the Calendar, the body votes to accept or reject the committee report, or one of the reports if the committee was divided. If an "ought to pass" report is accepted in either chamber, the bill then receives its first reading by the Secretary or the Clerk. Committee Amendments are read and adopted. Since legislators have copies of the printed bills and committee amendments, a motion is usually made to dispense with a complete reading. After the first reading, the bill is assigned a time for a second reading, which is usually the next legislative day.
If the bill has received a unanimous "ought to pass" or "ought to pass as amended" committee report, the House of Representatives uses a "Consent Calendar," which allows bills with either of those reports to be listed and to be engrossed for passage after they have appeared there for two legislative days, provided there is no objection. However, on the objection of any member, a bill can be removed from the Consent Calendar and debated. There is not a Consent Calendar in the Senate.
A legislator who wishes to delay a bill at any step of the process to get more information, or for other reasons, may make a motion to "table" the bill until the next legislative day or some other time. A legislator who strongly opposes a bill may make a motion for "indefinite postponement." If the motion to indefinitely postpone is approved, the bill is defeated. The motion requires approval by a majority vote in both bodies to succeed.
The next legislative day the bill is given its second reading
and floor amendments may be offered.
When one chamber has passed the bill to be engrossed, it is sent to the other body for its consideration.
The House has a consent calendar for unanimous Ought to Pass or Ought to Pass as Amended bills
which takes the place of first and second readings.
Floor debate: A bill may be debated on its merits at several points in the process. The debate may appear uncontrolled, but frequently a debating sequence has been arranged. If there is debate, the chair of the committee to which the bill was referred usually speaks first in favor of the committee report, or to answer questions, followed by other committee members who support the bill, by the sponsor and by those who may not support the committee report. The presiding officer decides who to recognize first and keeps track of how many times a legislator has spoken on a particular issue, whether on the main motion or on a subordinate one.
During floor debate, members communicate with each other by sending messages delivered by the chamber staff, or by moving to the back of the chamber to discuss strategies.
Voting: At any point, a legislator or the presiding officer may call for a vote on the current motion on the bill. When debate on a motion is over, a vote on the motion is in order. The vote may be a voice vote, or a vote "under the hammer," where approval is presumed unless an objection is raised before the presiding officer bangs the gavel. Two other types of votes are a "division" and a "roll-call vote." For a division, only the total number of votes cast for and against the motion is recorded. For a roll call vote, the members' names and how they voted are recorded. Any member may request a roll call, which requires the support of one-fifth of the members present to be ordered. A roll-call vote is signaled by the ringing of bells and members are given a few minutes to return to their seats. The Sergeant-at-Arms is ordered to secure the chamber and no one is permitted to leave until the vote is recorded.
In the House, members vote in a division or roll call by pushing a button at their desks; the results are displayed on two large boards on the front walls. In the Senate, divisions and roll calls are also done electronically. Members reserve the right to request that the yeas and nays be called by the Secretary. In this manner, the Senators are called in alphabetical order and respond with "yea" or "nay."
The Maine Legislature records and transcribes all the remarks that are made on the record. A complete account of all the arguments made on bills is available in the Legislative Record, which is generally available within a few weeks of the debate. The Record is also available on the Senate and House web sites.
Floor Amendments: Floor amendments to a bill may be offered by Senate and House members at appropriate times during floor debate. Requests for floor amendments should be filed with the Revisor's Office with as much lead time as possible. Floor amendments must be signed, presented to the Secretary of the Senate or the Clerk of the House, numbered, printed and distributed to the members before they may be offered on the floor. If an amendment affects an appropriation or causes an increase or decrease in state revenues, it must also include an amended appropriation or fiscal note.
The bill goes through a similar process.
If the second chamber amends the bill, it is returned to the first chamber for a vote on the changes.
It may then be sent to a conference committee to work out a compromise agreeable to both chambers.
A bill receives final legislative approval when it passes both chambers in identical form.
Passage to be Engrossed: After the debating and amending processes are completed, a vote is taken in both chambers to pass the measure to be engrossed. "Engrossing" means printing the bill and all adopted amendments together in an integrated document for enactment. Bills passed to be engrossed are prepared by the Revisor's Office and sent to the House and then the Senate for final enactment.
Enactment: After being engrossed, all bills must be considered for enactment or final passage, first in the House and then in the Senate. The necessary vote for enactment is usually a simple majority – there are important exceptions. Emergency bills and bills excepted from the State Mandate provision of the Constitution of Maine require a two-thirds majority of the entire elected membership of each body; referenda for bond issues and constitutional amendments require a two-thirds vote of those present. When a bill is enacted by both the Senate and House, it is sent to the Governor. If it fails enactment in both chambers, it goes no further in the process. If the Senate and House disagree on enactment or other votes, additional votes may be taken. These additional votes give each chamber the opportunity to recede and concur (back up and agree) with the other chamber or to insist on or adhere to its original vote. If the disagreement cannot be resolved, the bill is said to have failed enactment and died between the bodies.
During the debate on a bill, motions for reconsideration and to suspend the rules are often used to aid in reaching a consensus.
Committee of Conference: The Senate and House may develop and pass different versions of the same bill. When this happens, a special "conference committee" is in order and may be appointed by the presiding officers. A committee of conference consists of three members from each chamber who voted on the prevailing side. A report from a conference committee is usually accepted by both the Senate and House, but if it is not, or if the committee is unable to agree, the bill is defeated unless a new conference committee is appointed and successfully resolves the disagreement.
Appropriations Table: Bills that affect state revenues or expenditures fall into a special category. Once bills that affect the General Fund or Highway Fund have been passed to be engrossed in the Senate and enacted in the House they are assigned in the Senate to the special Appropriations Table (if they involve the General Fund) or to the special Highway Table (if they involve the Highway Fund). They are listed on the Senate Calendar and are held in the Senate for consideration late in the session.
At the end of the session, after the budget bills have been reported out by the Appropriations and Financial Affairs Committee, and usually after the budget bills have been enacted, the Appropriations Committee and legislative leadership, having received recommendations from committees, review bills on the special Appropriations Table to determine which bills can be enacted given available General Fund resources. The Transportation Committee follows similar deliberations for bills on the special Highway Table, considering available Highway Fund resources. Following those decisions, motions are made in the Senate, usually by the Senate chairs of the Appropriations and Transportation Committees, to remove bills from the special tables and to enact, amend or indefinitely postpone them. If enacted in the Senate, these bills are sent to the Governor for approval, as are all other enacted bills. Any of these bills that fail to be enacted or require amendment in the Senate are returned to the House for concurrence.
All joint orders or legislation proposing legislative studies are placed on a special study table. The Legislative Council reviews proposed studies and establishes priorities for allocation of budgetary and staffing resources to those studies. Legislative studies authorized by the Legislature or Legislative Council are budgeted and study expenses are charged to a study line in the Legislative Account, unless the authorizing legislation makes an appropriation to a study.
After final passage (enactment) the bill is sent to the
The Governor has ten days in which to sign or veto the bill.
If the Governor does not sign the bill and the Legislature is still in session,
the bill after ten days becomes law as if the Governor signed it.
If the Legislature has adjourned for the year the bill does not become law.
This is called a "pocket veto."
If the Legislature comes back into session, the Governor has three days
in which to deliver a veto message to the chamber of origin or the bill becomes law.
After a bill has been enacted by the Legislature, it is sent to the Governor, who has ten days (not counting Sundays) to exercise one of four options: the Governor may sign the bill, veto it, allow it to become law without signature or disapprove a dollar amount by using the line-item veto.
If the Governor signs the bill, it ordinarily becomes law 90 days after the final adjournment of that legislative session, unless it is an emergency measure, in which case it takes effect upon the Governor's signing or on a date specified in the bill. If the Governor vetoes the bill, it is returned to the chamber of origin, where a two-thirds vote of those present and voting in both the Senate and the House is required to override a veto. The Governor's veto message may include comments on particular aspects of the bill and the reasons for rejecting it, possibly raising new issues for legislators to debate. If the Legislature overrides the Governor's veto, the bill becomes law without gubernatorial approval.
If the Governor does not support a bill, but does not wish to veto it, it becomes law without the Governor's signature if not signed and not returned to the Legislature within ten days.
When the Legislature finally adjourns before the ten-day time limit has expired, a bill on which the Governor has not acted prior to the adjournment of the session becomes law unless the Governor vetoes it within three days after the next reconvening of that Legislature. If there is not another meeting of that particular Legislature lasting more than three days, the bill does not become law.
In addition to the preceding options, the Governor may exercise line-item veto power: within one day of receiving legislation for his or her signature, the Governor may disapprove the dollar amount appearing in an appropriation section or allocation section, or both, of the legislation. The Governor must propose a decrease in the appropriation or allocation or an increase in the deappropriation or deallocation. Those portions not revised by the Governor become law; the Governor's proposed revisions become law unless the Legislature overrides the changes by approving each original appropriation or allocation by majority vote of all elected members in each chamber.
A bill becomes law 90 days after the end of the legislative
session in which it was passed.
A bill can become law immediately if the Legislature, by a 2/3 vote of each chamber, declares that an emergency exists.
An emergency law takes effect on the date the Governor signs it unless otherwise specified in its text.
If a bill is vetoed, it will become law if the Legislature overrides the veto by a 2/3 vote of those
members present and voting in each chamber.
Numbering: Once a bill becomes a law, it is assigned a chapter number. Chapters are numbered consecutively, starting with Chapter 1 for the first law enacted in the first regular session, and continuing through all regular and special sessions of that legislative biennium. All laws are identified by the first year of the biennium. Thus, public laws passed by the 121st Legislature are identified as Chapters of the Public Laws of 2003, even though the laws of the Second Regular Session were passed in 2004 After each session, copies of every individual measure enacted or finally passed are available from the Engrossing Division of the Revisor's Office.
Laws of Maine: Following the adjournment of each regular session, all public laws, private and special laws, resolves, and constitutional resolutions passed in that year are published by the Office of the Revisor of Statutes in the Laws of the State of Maine. These softbound volumes are available to the public on request and are found in the law libraries in each county. The information is also available on the Legislature's web page http://legislature.maine.gov/ros/.
Codification: The Maine Revised Statutes Annotated, the codified compilation of Maine Public Laws, is updated annually by West Publishing Company in cooperation with the Revisor of Statutes to include changes enacted by each session of the Legislature.
Further Action: After a bill is enacted, it may be affected by subsequent actions, including referenda, regulatory interpretations and court actions.
Referenda: If the Legislature approves by the necessary two-thirds vote of both chambers a resolution proposing a constitutional amendment, that resolution must be submitted to the people for a referendum at the next general election. Constitutional amendments do not require approval by the Governor, but must be approved by a majority of the voters.
A referendum can also result from a successful direct initiative petition by the voters to either enact or repeal a law. After the Secretary of State verifies the signatures on the petitions, the measure is submitted to the Legislature, which may pass that law as submitted, or refer the initiated measure to the people for referendum vote. The Legislature may also enact an alternative version, called a competing measure, in which case both versions are referred to the people for a referendum vote.
A third type of referendum is triggered by a successful petition to exercise the people's veto. Voters may petition for a referendum to approve or disapprove any law enacted by the Legislature, but not yet in effect. If the law is not ratified by a majority of voters in a statewide general or special election, it does not take effect.
The Legislature at times inserts referendum provisions in legislation for policy reasons. For instance, substantive amendments to water district charters customarily include a local referendum provision. If the referendum is not approved as provided in the legislation, then those portions of the legislation subject to referendum approval do not take effect.
Finally, the Constitution of Maine requires that referenda be held for all bond issues.
Agency Rulemaking: Many laws authorize state agencies to adopt rules to implement laws. These rules must be adopted in accordance with the Maine Administrative Procedure Act (MAPA). MAPA requires, among other things, public and legislative notice of rulemaking and that major substantive rules be submitted to the Legislature for review and approval. Once properly adopted, rules have the effect of law.
Court Action: Another way in which laws may be affected is by court action. As a result of cases brought to them, the Maine courts interpret laws passed by the Legislature. Court decisions may clarify the purpose of a law, its application, or the meaning of certain words in the context of the statute. The courts also may determine whether a law conforms to the provisions of the United States Constitution and the Constitution of Maine.
Committee reports shall include one of the following recommendations:
Ought to Pass
Ought to Pass as Amended
Ought to Pass in New Draft
Ought Not to Pass
Refer to Another Committee
When the committee recommendation is not unanimous, a minority report or reports are required.
Last Updated 2/10/14